Heat n Bond Iron On Fusible Fleece - High Loft - 45" x 15 Yards
- Heat n Bond fusible fleece full bolt: 45" x 15 yards (114.3cm x 13.7m)
- Use Fusible Fleece Interfacing to add body and loft to appliqué work, tote bags, wall hangings, costumes and home decor projects on fabrics that can be fused
- Adds support and structure to your craft projects, making them look professional!
- Similar to Fusible Batting and Wadding
- Machine Washable & Dry Cleanable
- 100% Polyester
- Single Sided fusible fleece
- Iron On (no pinning or shifting)
- From the Therm O Web Company
Instructions:
(All products come with instructions on packaging)
1) Pre-shrink interfacing by submerging it in hot water for 15 minutes and air dry (or with a blast of steam from an iron)
2) Pre-wash all fabrics without fabric softeners. Pre-test interfacings on materials before starting project
3) Cut Fusible Interfacings per pattern instructions. Cut away seam allowances if needed
4) Pre-heat iron to wool (medium heat) setting with steam
5) Place the rough side of the interfacing onto the back (wrong side) of material to be bonded
6) Cover with a light, dry pressing cloth. Press and hold iron with medium pressure for 10-15 seconds.
Repeat by lifting iron to new area and pressing, slightly overlapping previous area until entire surface is bonded
7) Allow pieces to cool. If more ironing is needed, iron for an additional 5 seconds from front of project
8) Sew as needed per project instructions
- Use Fusible Fleece Interfacing to add body and loft to appliqué work, tote bags, wall hangings, costumes and home decor projects on fabrics that can be fused
- Adds support and structure to your craft projects, making them look professional!
- Similar to Fusible Batting and Wadding
- Machine Washable & Dry Cleanable
- 100% Polyester
- Single Sided fusible fleece
- Iron On (no pinning or shifting)
- From the Therm O Web Company
Instructions:
(All products come with instructions on packaging)
1) Pre-shrink interfacing by submerging it in hot water for 15 minutes and air dry (or with a blast of steam from an iron)
2) Pre-wash all fabrics without fabric softeners. Pre-test interfacings on materials before starting project
3) Cut Fusible Interfacings per pattern instructions. Cut away seam allowances if needed
4) Pre-heat iron to wool (medium heat) setting with steam
5) Place the rough side of the interfacing onto the back (wrong side) of material to be bonded
6) Cover with a light, dry pressing cloth. Press and hold iron with medium pressure for 10-15 seconds.
Repeat by lifting iron to new area and pressing, slightly overlapping previous area until entire surface is bonded
7) Allow pieces to cool. If more ironing is needed, iron for an additional 5 seconds from front of project
8) Sew as needed per project instructions
